The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications.

The PESB series incorporates patented scrubber technology for reliable performance in dirty water irrigation applications.

PEB Valve Features Include:

• Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance.

• Globe configuration.

• Normally closed, forward flow design.

• Slow closing to prevent water hammer and subsequent system damage.

• Low flow capability for a wide range of applications.

• One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.

• Flow control handle adjusts water flows as needed.

• Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.

• Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.

• Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads

Specifications Include:

• Temperature: Up to 150° F (66° C)

• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:

  • 0.41 A (9.8 VA) inrush current

  • 0.28 A (6.7 VA) holding current

• Solenoid coil resistance: 24 Ohms, nominal

Specifications:

• Inlet Size: 1

• Inlet Thread: Female NPT

• Flow Control: 0.25 - 200

• Pressure Rating/Range: 20 - 200